Как правильно залить прошивку в плеер М3.
1. копируем софт с CD на винт
2. читаем документацию
How to setup the driver and software
I Driver setup
1. Open the file Windows Install Driver in the documents ca536_driver in the CD.
2.To run the file "setup.exe."
3. Follow the guider in the window.

II. Software update
1. Open the PMP and into the "setup" mode.
2. Select "storage" mode .
3. Select software update, then the PMP will display "ok."
4. Connect the PC ,then the PMP will display the Ver. of the current.
5. Follow the next
1. Open the documents ISP_V5.2.2_20050128,select the file "ISP_V5.2.2.exe" and
double click the file to run .
2. it will display the next window.
3. Please select "normal" and "nand", then the button "ISP"
will be change into activity button.
4. After click the button "isp",the window will be shown for the
user to select the software, please select the file ET_Mx_Vx.bin and click
the button "open".
5. If the path is right you can click "yes" otherwise you must
be click "no"'.
When the software download succeed it will show the follow result ,at the same time the pmp
will restart after the tft black then you can unconnected to the pc with USB cable ,the software
update has been finished )
After update software, the word library must be downloading
---------------------------------------
кто по английски не понимает то 
1) ставим драйвер при откл плеере и наличии USB в компе
 CA536_Driver\WindowsInstallDriver\Setup.exe
перезагружаемся, подключаем плеер к USB, отвечаем на все вопросы.
отключаем плеер, перезагружаемся. готово.
2) обновление прошивки (update)
вкл плеер, в меню сетап/сторидж/software update жмем. ОК.
подключаем к USB на экране читаем тек версию прошивки.
запускаем прогу \ISP_V5.2.2_20050128\ISP_V5.2.2.exe
жмем "normal" и "nand" потом "ISP"
выбираем на диске  ET_M3_V1.bin  жмем ОК.
(если во время обновления выключили свет или комп завис 
то плеер можно выбрасывать :)

3. как залить библиотеку слов (национальный шрифт)
The guider of the word- library loading
1:open the file CutImageV1.1.3.exe in the CD (path . \CutImage V1.1.3\CutImage
V1.1.3\CutImageV1.1.3.exe)
Then it will display the next window
2.Click the button "---"to choice the word library filename ".\CutImage V1.1.3\jianti000.bin"
then input "03a5" to the "sector(Hex)" bloke
3. Open the PMP and into the "setup" mode; next select "storage" mode; next Select software
update, then the PMP will display "ok."; Connect the pc, then the PMP will display the ver. of the
current..
4. Click the button which mark "down to flash" in the window and exit it until it display
"download to flash ok"
Wait until finished the download then exit the USB mode , tune off the PMP and start it again.
кто не понимает
вкл плеер, в меню сетап/сторидж/software update жмем. ОК.
подключаем к USB на экране читаем тек версию прошивки.
запустить прогу CutImageV1.1.3.exe
печатаем 03a5 в поле "sector(Hex)"  или лучше копирум , т.к "а"-латинская.
кнопкой "---" выбираем jianti000.bin  затем жмем "down to flash"
ждем "download to flash ok". выход EXIT
отключаем плеер от компа, выключаем и включаем снова.